Webpage Copyright©2015-2017 www.groovedfitting.cn     鲁ICP备15028456号    by:300.cn

CONTACT

Coupling              Elbow                           Equal Tee
Reducing Tee       Mechanical Tee           U-bolted Mechanical Tee

Equall Cross          Reducing Cross           Mechanical Cross
Flange                   End Cap                      Reducer

 

TEL:+86-536-7663567

FAX:+86-536-7663567

E-MAIL:sales@groovedfitting.cn
SITE:www.groovedfitting.cn

ADD:Industrial Park, Gangcheng Street, High-tech Development Zone, Weifang, Shandong, China. P.C.261201

PRODUCTS

PRODUCTS DETAILS

>
>
Polymer Cement Aterproof Coating
Page view:

Polymer Cement Aterproof Coating

没有此类产品
DOWNLOAD THE CATALOGUE
CONTACT
Description
 

Product Introduction

Polymer cement waterproof coating (JS composite waterproof coating) is one double-

component, water-based waterproof coating which widely used in the waterproof fieldsin

recent years; it is made from organic polymer latex, cement and inorganic pigments;not only

possesses the organic coating's high elasticity but also with the inorganiccoating' s durability,

after solidifying, a rigid / elastic waterproof film formed and willoffer you an ideal waterproofing

effect.

 

Product Characteristics

 

Fine tensile strength and elasticity; good adaptability to the contract / deformation /crack of the

substrates.
Coating work can be done on the moisture substrates with high bonding strength .
The finished coating film will be an ideal waterproof layer with well ventilating function.As a

water-based waterproof coating, non-toxic, no pollution, environmentally-friendly.Cold

applying, easily handling, coating on wet / moistured substrates workable, shortenyour

programming time and economical.

 

Applicable

This coating is widely used on non-exposed roofs of new and old buildings, basements,tunnels,

culverts, swimming pools, reservoirs, balconies , bathrooms, toilets, coolingpools.

Product Performance

 
 

As per standard under GB/T 23445-2009

 

Matters Needing Attention

The substrates must be smooth, rigid, no oil, no water and other contaminants; repairing

thevoids/hollows/cracks; rounded the inside and outside corners to arc shapes; if leakage

existing,closing up first before coating; for too much dry substrates, drizzle a suspicion of water

andkeep moistured when coating.

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待