Product Introduction

Universal K11 waterproof slurry is an environment- friendly waterproof material compounded

bymodified polymer resin emulsion and special powder with osmotic crystallization effect.

Wateris used as a dispersion medium as a reaction curing initiator, and water is used to

inducereactive groups in polymer liquid materials and reactive substances in powder materials

to reactand cure each other to form a waterproof coating with good flexibility performance.

Thewaterproof coating is nontoxic, waterproof, impermeable, flexible, weather resistant, high.

Implementation Standard

Implementation standard: JC/T2090-2011

Product Characteristics

It can be applied to all kinds of dry or humid bases and various degrees of waterproof

andmoistureproof works.
Non-toxic and tasteless, and can be applied to direct drinking water projects and

waterproofand anti-seepage projects of various reservoirs.
It is convenient to mix and construct, and is the best waterproof material for toilet, kitchen

andbathroom walls.

It can be applied to all kinds of dry or humid bases and various degrees of waterproof

andmoistureproof works.
Non-toxic and tasteless, and can be applied to direct drinking water projects and

waterproofand anti-seepage projects of various reservoirs.
It is convenient to mix and construct, and is the best waterproof material for toilet, kitchen

andbathroom walls.
The coating is complete and seamless, which is suitable for irregular base flour and

complicatedwaterproof engineering of pipelines.
Ecological and environmental protection, which can be applied to underground waterproof

andimpermeability projects with closed or semi-closed and poor ventilation.
Excellent adhesion performance. Ceramic tile, stone, marble, etc. can be pasted

whilewaterproof.
Tight application can adapt to the "expansion with heat and contraction with cold" at

thegrass-roots level SO as to prevent micro-leakage.
After the construction is completed, similar moisturizing curing is not required, and it will

notfall off or pulverize.
It will not shrink after drying, and can prevent the penetration of silicate on the substrate.

Methods Of Use

Ingredients: mixing ratio: powder: liquid = 3: 1.
Detailed Extra ply treatment: the base should be smooth, solid, clean and free of oil stains,

andthe Yin and Yang angles should be circular arc. According to the design requirements, a

quick-drying plugging sealing material shall be embedded in the reserved groove, and

multiple coatsshall be applied to the yin and yang corners and pipe parts.
Low coating is generally 2~3, large area waterproof layer construction each besmear

brushsprocess interval of 2~4 hours, each time the coating thickness is 0.4mm~0.6mm.

When thebottom layer is in a wet state for a long time, the hardening time of the first

coating is about 4-8 hours, and the construction can only be started when the first layer is

not completely dried.
When carrying out the second process, the direction of brushing shall be crossed with the

firstone, and careful inspection shall be conducted without sand holes and omissions to

achieve thebest covering effect.