Product Introduction

The product belongs to a single (double) component chemical reaction curing type

waterproofmaterial, belongs to an environment-friendly product, reduces the influence on

people and theenvironment, and is an ideal tar polyurethane substitute product; The

construction of theproduct is simple and convenient, a seamless and complete elastic

waterproof layer is formedafter the product is solidified, the waterproof and impermeability of

construction engineering isimproved, especially the product has higher strength and

extensibility, and has strongadaptability to cracking or expansion of a base layer; The

maintenance is convenient, and theoriginal waterproof effect can be achieved only by locally

repairing the damaged part, thussaving time, labor and cost. Color can be adjusted to meet

your color needs.

Implementation Standard

Product execution Standards: GB/T19250-2013

Implementation Standard

Low base requires strong, smooth, without sundry, fully dry, Yin and Yang Angle to

makecircular arc shape, Yin Angle diameter is greater than 50mm, Yang Angle diameter is

greaterthan 10mm .
Ingredients and dosage: According to the construction dosage, mix the components A and

Baccording to the ratio of 1: 2, and stir evenly for use. The reference dosage is: the dosage

of1mm thick coating film is about 1.3~ 1.5kg/m2 (single component can be directly

applied).Low base requires strong, smooth, without sundry, fully dry, Yin and Yang Angle to

makecircular arc shape, Yin Angle diameter is greater than 50mm, Yang Angle diameter is

greaterthan 10mm ..
Ingredients and dosage: According to the construction dosage, mix the components A and

Baccording to the ratio of 1: 2, and stir evenly for use. The reference dosage is: the dosage

of1mm thick coating film is about 1.3~ 1.5kg/m2 (single component can be directly applied).
Large-area waterproof construction: the mixed coating shall be evenly coated with rubber

orplastic scraper, with uniform thickness, generally 1.5~2.0mm, and shall be applied 3~4

times.The latter coating shall be applied vertically after the previous coating is solidified to

form afilm, and shall generally be formed separately. A layer of Fetal reinforcement Materials

shall beadded to the underground engineering floor.
Coating thickness: underground works shall be 1.2~ 2.0mm, generally 1.5mm, toilet room

shallnot be less than 1.5 mm. When exposed roofing works adopt multi-channel

waterproofing, thethickness of each channel shall not be less than 1.2 mm. When

waterproofing grade III roofingis used for one-channel fortification, the waterproof thickness

shall not be less than 2 mm.When Fetal reinforcement Materials is additionally paved

between the coatings, the coatingthickness below the carcass shall not be less than 1.0mm,

and the coating above shall not beless than 0. 5mm ..
Ending and edge treatment: add coating to seal.
Protective layer: the surface of coating waterproof layer shall be isolated and

protectedaccording to design requirements.

Matters Need Attentio

Store the material in a dry and ventilated room.
In transportation, the sun and rain are strictly prevented, and collision is prevented.
The storage period of the product is half a year, after passing the storage period, the

productcan be used only after it is re-checked.